Mätning och skydd
Mätgivare och skyddsanordning för en- och trefas kraftsystem.
-
- anslut en PLC via CAN-bussen
- använd reläer för att trycka kommandon och för att styra en brytare
Mått
easYprotec 1410 | MFR300 | |
---|---|---|
Funktioner | ||
3 äkta RMS-spänningsingångar | ||
3 sann RMS-strömingångar | ||
Klass 0,5 mätnoggrannhet | ||
Konfigurerbara utlösnings-/kontrollbörvärden | ||
Konfigurerbara fördröjningstimer för individuella larm (0,02 till 300,00 s) | ||
4 konfigurerbara reläer (växling) | 2 | 4 |
1 "Redo för drift" relä | ||
Omkopplingsbar relälogik | ||
2 kWh-räknare (max. 1012 kWh) | ||
2 kvarh-räknare (max. 1012 kvarh) | ||
CANopen / Modbus kommunikation | ||
Konfigurerbar via CAN-buss / RS-485 / Serviceport (USB/RS-232) | ||
Konfigurerbar via serviceport (USB / RS-232) | ||
Skydd | ||
Över-/underspänning (59/27) | ||
Över-/underfrekvens (81O/U) | ||
Spänningsasymmetri (47) | ||
Överbelastning (32) | ||
Positiv/negativ belastning (32R/F) | ||
Obalanserad last (46) | ||
Fasförskjutning (78) | ||
Överström (50/51) | ||
df/dt (ROCOF) | ||
Jordfel | ||
QV-övervakning | ||
Spänningsökning | ||
Fritt konfigurerbar tidsberoende underspänningsövervakning för: FRT (fault ride-through) |
MFR-300 Multifunction Relay / Measuring Transducer with CANopen / Modbus Communication
The MFR 300 is a measuring transducer for monitoring single- and three-phase power systems. The MFR 300 has both voltage and current inputs for measuring an electrical power source. A digital processor makes it possible to accurately to measure true RMS values, regardless of harmonics, transients or disturbing pulses. The primary measured and calculated values are transmitted via CANopen / Modbus protocol to a supervisory control system.
The MFR 300 performs monitoring functions for mains decoupling, including four freely configurable time-dependent undervoltage monitoring functions for FRT (fault ride-through).
The primary measured values of voltage and current are used to calculate the real, reactive, and apparent power and the power factor (cosphi) values.
Tillbehör
Verktygslåda
configuration via Woodward’s standard Software Toolkit.
USB-konfigurationsgränssnitt
USB-portkonfigurationsgränssnitt. PC/laptop-sidan är separerad från Woodward-enhetens sida genom galvanisk isolering.
artikelnummer: 5417-1251