Meranie a ochrana
Merací prevodník a ochranné zariadenie pre jedno- a trojfázové energetické systémy.
-
- pripojiť PLC cez zbernicu CAN
- použite relé na stlačenie príkazov a ovládanie ističa
Meranie
easyprotec 1410 | MFR 300 | |
---|---|---|
Funkcie | ||
3 skutočné RMS napäťové vstupy | ||
3 skutočné RMS prúdové vstupy | ||
Presnosť merania triedy 0,5 | ||
Nastaviteľné hodnoty vypnutia/riadenia | ||
Konfigurovateľné časovače oneskorenia pre jednotlivé alarmy (0,02 až 300,00 s) | ||
4 konfigurovateľné relé (prepínacie) | 2 | 4 |
1 Relé „Pripravené na prevádzku“. | ||
Prepínateľná reléová logika | ||
2 kWh počítadlá (max. 1012 kWh) | ||
2 kvarhové počítadlá (max. 1012 kvarh) | ||
Komunikácia CANopen / Modbus | ||
Konfigurovateľné cez CAN bus / RS-485 / Servisný port (USB/RS-232) | ||
Konfigurovateľné cez servisný port (USB / RS-232) | ||
Ochrana | ||
Prepätie/podpätie (59/27) | ||
Nadmerná/nedostatočná frekvencia (81 O/U) | ||
Asymetria napätia (47) | ||
Preťaženie (32) | ||
Kladné/záporné zaťaženie (32R/F) | ||
Nevyvážená záťaž (46) | ||
Fázový posun (78) | ||
Nadprúd (50/51) | ||
df/dt (ROCOF) | ||
Zemná porucha | ||
Monitorovanie QV | ||
Zvýšenie napätia | ||
Voľne konfigurovateľné časovo závislé monitorovanie podpätia pre: FRT (fault ride-through) |
MFR-300 Multifunction Relay / Measuring Transducer with CANopen / Modbus Communication
The MFR 300 is a measuring transducer for monitoring single- and three-phase power systems. The MFR 300 has both voltage and current inputs for measuring an electrical power source. A digital processor makes it possible to accurately to measure true RMS values, regardless of harmonics, transients or disturbing pulses. The primary measured and calculated values are transmitted via CANopen / Modbus protocol to a supervisory control system.
The MFR 300 performs monitoring functions for mains decoupling, including four freely configurable time-dependent undervoltage monitoring functions for FRT (fault ride-through).
The primary measured values of voltage and current are used to calculate the real, reactive, and apparent power and the power factor (cosphi) values.
Príslušenstvo
Toolkit
konfigurácia pomocou štandardnej sady softvérových nástrojov Woodward.
USB konfiguračné rozhranie
Konfiguračné rozhranie USB portu. Strana PC/laptopu je oddelená od strany jednotky Woodward galvanickou izoláciou.
číslo dielu: 5417-1251