測定と保護
単相および三相電源システム用の測定トランスデューサおよび保護装置。
-
- CANバスを介してPLCを接続する
- リレーを使用してコマンドをプッシュし、ブレーカーを制御します
計測
easYprotec 1410 | MFR300 | |
---|---|---|
関数 | ||
3つの真のRMS電圧入力 | ||
3つの真のRMS電流入力 | ||
クラス0.5の測定精度 | ||
構成可能なトリップ/制御セットポイント | ||
の設定可能な遅延タイマー 個別のアラーム(0.02〜300.00秒) | ||
4つの構成可能なリレー(切り替え) | 2 | 4 |
1「操作準備完了」リレー | ||
切り替え可能なリレーロジック | ||
2 kWhカウンター(最大1012 kWh) | ||
2 kvarhカウンター(最大1012 kvarh) | ||
CANopen/Modbus通信 | ||
CANバス/RS-485を介して構成可能 /サービスポート(USB / RS-232) | ||
サービスポート経由で設定可能(USB / RS-232) | ||
保護 | ||
過電圧/低電圧(59/27) | ||
過周波数/低周波数(81O / U) | ||
電圧の非対称性(47) | ||
過負荷(32) | ||
正/負の負荷(32R / F) | ||
不均衡な負荷(46) | ||
位相シフト(78) | ||
過電流(50/51) | ||
df / dt(ROCOF) | ||
地絡 | ||
QVモニタリング | ||
電圧上昇 | ||
FRT(障害ライドスルー)の時間依存の低電圧監視を自由に構成可能 |
MFR-300 Multifunction Relay / Measuring Transducer with CANopen / Modbus Communication
The MFR 300 is a measuring transducer for monitoring single- and three-phase power systems. The MFR 300 has both voltage and current inputs for measuring an electrical power source. A digital processor makes it possible to accurately to measure true RMS values, regardless of harmonics, transients or disturbing pulses. The primary measured and calculated values are transmitted via CANopen / Modbus protocol to a supervisory control system.
The MFR 300 performs monitoring functions for mains decoupling, including four freely configurable time-dependent undervoltage monitoring functions for FRT (fault ride-through).
The primary measured values of voltage and current are used to calculate the real, reactive, and apparent power and the power factor (cosphi) values.
付属品
ツールキット
Woodwardの標準ソフトウェアツールキットによる構成。
USB構成インターフェース
USBポート構成インターフェース。 PC /ラップトップ側は、ガルバニック絶縁によってウッドワードユニット側から分離されています。
部品番号:5417-1251